With the continuous improvement of human life quality, more and more people are looking for high-quality daily necessities, many of which need to be polished and polished. The abrasive belt in the abrasive belt machine is mainly cutting. Because it has the characteristics of high processing efficiency, strong applicability, wide application range and low cost, it is widely favored by modern manufacturing enterprises in all fields.


Types of abrasive belt in abrasive belt machine:


Abrasives can be divided into artificial abrasives and natural abrasives,


Artificial abrasive


Corundum: brown corundum, white corundum, single crystal corundum, microcrystalline corundum, chromium corundum, black corundum and zirconium corundum.


Carbides: black silicon carbide, rate silicon carbide, boron carbide.


Superhard abrasive: ceramic abrasive, artificial diamond, cubic silicon carbide.


Natural abrasive:


Iron oxide, chromium oxide, glass sand, natural emery, garnet, silica, natural diamond.


In principle, all the above Abrasives can be used to make belt machine abrasive belt, but from the perspective of practicality, economy and effectiveness, only a small part of abrasives suitable for belt are brown corundum, white corundum, zirconium corundum, black silicon carbide, ceramic abrasives and a small amount of green silicon carbide and natural corundum. Superhard abrasives such as artificial diamond and cubic boron nitride can be used to make special belt only in a few cases, Ordinary abrasive belt is difficult to use this kind of abrasive. Because these abrasives are expensive. Moreover, special base material, special adhesive and special manufacturing process must be adopted to stick it firmly.